Hand Held Products DOLPHIN 7600 - Manual (Page 60)

6 - 2 Rev D
10/18/2007
Dolphin® 7600 User’s Guide
Connecting the USB Cable
Connect the USB cable to the I/O connector to facilitate USB communication between the Dolphin device and host workstation.
*This is a communication-only cable until you plug the power cable into the power port.
Connecting the Power Cable
The power port on the back end of the USB connector fits the power cable that comes with each Dolphin 7600 device. To charge
the device while communicating, connect the power cable to the power port.
USB
Cable
I/O
Connector
Host
Workstation
*Power
Port USB
Connector
Power Cable
Power Port