Handspring Treo 300 - Manual (Page 119)

Section 6
Application-Specific Tasks 111
A
ppl
ic
ati
o
n
Ta
sk
s
6
Security
Prefs Enables you to lock your phone and define emergency numbers.
Wireless Mode Lock: Locks your phone and requires you to enter a
password to make outgoing calls (other than emergency numbers).
The default password is the last four digits of your phone number. You
can still receive incoming calls and view your data in handheld
mode.
ᮣ On Power Off. Locks wireless mode each time you turn off
your phone.
ᮣ Immediately. Locks wireless mode upon exiting this dialog
box.
Communicator Lock: Locks your phone upon exiting this dialog box.
When Communicator Lock is on, you must enter a password to view
your data in handheld mode and to make outgoing calls (other than
emergency numbers). You can still receive incoming calls. The
default password is the last four digits of your phone number.
Important: If you use Communicator Lock to lock your
phone, you must enter the exact password to re-
activate your phone. If you forget the password, you
need to perform a hard reset to resume using your
phone. Performing a hard reset deletes all the records
in your phone; however, you can restore all previously
synchronized data at the next HotSync operation. See
page 235 for details. Note that performing a hard reset
provides access only to handheld mode. To resume
using wireless mode, you must contact Sprint to obtain
the unlock code.
Custom Emergency Numbers. Enables you to define three numbers
that you can dial manually when your phone is locked.
Change Password. Enables you to change the default password.