Handspring Treo 300 - Manual (Page 225)

Section 8
Advanced HotSync® Operations 217
H
o
tS
ync
O
pera
ti
ons
8
4. Click the Local tab to display the settings for the connection between
your computer and the HotSync cable, and adjust the following
options as needed.
5. If you are attached to a network, click the Network tab to display the
network settings and adjust the options as needed. See page 225 for
more information.
6. Click OK .
Serial Port Identifies the port that your desktop software uses to communicate with
the optional serial HotSync cable. This selection should match the
number of the port to which you connected the optional cable.
Note: Your phone cannot share this port with an internal
modem or other device.
Speed Determines the speed at which data is transferred between your phone
and your desktop software. Try the As Fast As Possible rate first, and adjust
downward if you experience problems. This setting allows your desktop
software and your phone to find and use the fastest speed.