Hobart Welding Products OM-1594 - Manual (Page 23)

OM-1594 Page 19
4-8. Optional Meter Circuit Board Settings
Ref. 802 359 / Ref. 186 266
Tools Needed:
1/4 in
1 Meter Board PC2
2 DIP Switch S2
Set DIP switch S2 for type of
welding power source, and desired
wire feed speed display.
Reinstall hinged door and side
panel.
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
Or
Or
Meters/Minute
Inches/Minute
Digital Meter Display
Arc Voltage Sensing Using Voltage Sensing
Lead For Welding Power Source That Does
Not Support Pins F And H
Voltage Sensing Function
Arc Voltage Sensing Using Feedback From
Welding Power Source That Does Support
Pins F And H
1 2
X Means switch position does not affect
specified function.
.
Means switch must be in this position.
2
1
.
For sense lead, connect PLG51 to PLG50.
For voltage feedback, connect PLG51 to PLG52.
1 2 3 4 5
Switch settings from the factory.