Hayes Microcomputer Products DIVA T/A User Manual
Page 17
DIVA T/A PC Card User’s Guide 17
7
Select the Eicon DIVA T/A, then click Next.
8
Select the appropriate COM Port the DIVA T/A is connected to.
Click Next, then click finish.
9
Close the Modem Properties window.
10
After closing the Modem Properties window, you are prompted
to configure Dial-Up Networking, as the install Modem list has
changed. Click Yes to configure Dial-Up Networking.
11
From the Remote Access Setup window, remove any unused
devices that use the same COM port as the DIVA T/A, and then
click Add.
12
In the Add RAS Device window, select the Eicon DIVA T/A
PC Card from the drop-down list and click OK
13
From the Remote Access Setup window, click Continue. You
will be prompted to shutdown and restart your computer. Click
No. Do not restart your system
14
Go to page 20 and continue at the section “Installing the DIVA
T/A Software.”