Hayes Microcomputer Products DIVA T/A - Manual (Page 52)

DIVA T/A PC Card User’s Guide 52
Parameter Description
ISDN Cost
Reduction
Timers
(Continued)
Billing Interval: Specifies the increments
your Service Provider uses to bill
subsequent usage of your ISDN line (usage
after the initial Billing Interval expires).
For example if your provider charges $Y per
minute for each minute following the Initial
Billing Interval, enter 60.
Note: Setting the timer to 0 disables it. The
Initial Billing Interval remains in effect.
Default: 60 seconds.
AutoSPID
Location Storage Note: Available on North American models
only.
Select the location to which the AutoSPID
settings will be saved on power up.
For more information on AutoSPID, refer to
page 76.
9 After completing the advanced parameters configuration, press
Escape to exit the Advanced menu.
10 From the Main menu, select Save Profile and press Enter to
save the changes made to the profile.
11 Select Restart Card. Verify that the correct startup profile is
specified.
After the DIVA T/A has restarted, verify that it is working correctly
by checking the DIVA T/A D LED. If the D LED is steady or flashing
intermittently, the DIVA T/A is working correctly. If it is not, check
the configuration and try again. For more details on the LEDs, refer to
“LED Status Indicators on the DIVA T/A” on page 81.
You are now ready to use your ISDN connection. Continue at the
section “Using the DIVA T/A.”