HONDA Outdoor Motor BF90D - Manual (Page 49)

47
Tiller Handle Height/Angle
Adjustment (LHT type)
BEFORE OPERATION
HANDLE ANGLE: 7°
HANDLE ANGLE: 13°
HANDLE ANGLE:
21°
Reference point
HEIGHT
17.0 in
(433 mm)
14.1 in
(359 mm)
11.7 in
(296 mm)
HEIGHT ADJUSTMENT
BLOCK
8 28 mm
FLANGE BOLT
HANDLE ANGLE: 13°
HANDLE ANGLE: 21°
HANDLE ANGLE: 7°
Install the height adjustment block
so that the selected angle of the
tiller handle is in this position.
The tiller handle height and angle can
be adjusted to three positions by
changing the installation direction of
the height adjustment block. Select a
suitable height and angle for the
operator and secure the block.
Raise the tiller handle and remove
the 8
28 mm flange bolt and the
height adjustment block.
Pull down the tiller handle.
Determine the height adjustment
block installation direction and
secure the block with the 8
28
mm flange bolt.
2.
1.
08/08/04 18:45:50 31ZY9600_048