HONDA Outdoor Motor BF90D - Manual (Page 112)

110
REMOVAL FROM STORAGE
STORAGE
PROTECTOR
OUTBOARD MOTOR STAND
(Port side turned down as shown.)
BEFORE
OPERATION
Check your outboard motor as
described in the
chapter of this manual.
If the cylinders were coated with oil
during storage preparation, the
engine may smoke briefly at startup.
This is normal.
Cover the outboard motor to keep out
dust. Do not use plastic sheet as a
dust cover. A nonporous cover will
trap moisture, promoting rust and
corrosion.
Rest the motor on a cushion of
protective material.
If it is necessary to store the outboard
motor horizontally as shown, drain
the vapor separator (p.
), and
drain the engine oil (p. ), before
removing the outboard motor from
the boat.
If the outboard motor will be
removed from the boat for storage,
we recommend storing it vertically
by mounting it on a commercially
available stand.
107
86
08/08/04 18:55:19 31ZY9600_111