Honeywell HRSD16 - Manual (Page 25)

Installation
Document 800-00918 Rev F 25
02/08
Connecting Audio
Note It is the user's responsibility to determine if local laws and
regulations permit recording audio.
Your DVR can record audio from up to two sources. Connect the audio sources to
Audio In 1 and Audio In 2 as needed using RCA jacks. Connect Audio Out to your
amplifier.
Figure 2-4 Audio Connectors
Note The DVR does not have amplified audio output, so you need a
speaker with an amplifier. The DVR does not have a pre-amplifier
for audio input, so the audio input should be from an amplified
source, not directly from a microphone.
Connecting the Monitor
Using a Computer Monitor
A VGA connector is provided so that you can use a standard, multi-sync computer
monitor as your main monitor. Use the cable supplied with your monitor to connect it to
the DVR.
Figure 2-5 VGA Connector
Using a Spot Monitor
Connect the main monitor to the Video Out connector. Connect the spot monitor to the
SPOT connector as needed.