Honeywell HRSD16 - Manual (Page 76)

Configuration
76
Save your changes by highlighting Save and pressing . Select Cancel to exit the
screen without saving the changes.
Event Settings
Your DVR can be set to detect many different events. You can also determine how it
reacts to these events.
The Settings tab for each of the events settings screen is different. But for each type of
event setting, the Actions 1 and Actions 2 tab settings are the same.
On the Actions 1 tab, you can choose which camera or cameras you want recorded
with that event. You can set what the DVR does when an alarm output is detected, which
can include an internal DVR buzzer. You can also set notification actions.
On the Actions 2 tab, you can select PTZ (pan, tilt, zoom) presets for each camera and
you can assign spot monitors to cameras.
Figure 3-50 Event Menu
Alarm-In Screen
The alarm terminal strip on the back of the DVR has inputs associated with each alarm.
You can set up each input on the Alarm-In screen.
Highlight Alarm-In in the Event menu and press . The Alarm-In Settings Setup
screen appears.
Figure 3-51 Alarm-In Settings Screen