Honeywell RTH4300B User Manual

Page 12

Text mode
Original mode

Advertising

Operating Manual

About your new thermostat

To adjust program schedules

1. Press

SET until Set Schedule is displayed.

2. Press

to set your weekday Wake

time (Mon-Fri), then press

SET.

3. Press

to set the temperature for this

time period, then press

SET.

4. Set time and temperature for the next time

period (Leave). Repeat steps 2 and 3 for each
weekday time period.

5. Press

SET to set weekend time periods (Sat-

Sun), then press

RUN to save & exit.

Note: Make sure the thermostat is set to the system
you want to program (Heat or Cool).
Note: To cancel an unwanted time period (except
Wake), press and hold

HOLD for 4 seconds

while in the Set Schedule mode.

Press

SET 3 times, then adjust time.

Press

SET, then set desired temperature.

Wake

Set Schedule

MonTueWedThuFri

Heat

Set To

6:30