Hobart Welding Products AIRFORCE 700I - Manual (Page 30)

.
A complete Parts List is available at www.MillerWelds.com
OM-244 013 Page 26
6-2. Checking Or Replacing Filter Element
! Turn power Off, and
disconnect input power plug
from receptacle. Check to
see that all diagnostic LED’s
have
stopped flashing
before removing wrapper
from unit.
Turn power Off, and disconnect
input power plug from receptacle.
Remove wrapper from unit.
1 Filter Base
2 Filter
3 Filter Cup
Unscrew filter cup from base.
Remove cup.
Unscrew filter element from base.
Check filter element for dirt and
moisture, and replace if necessary.
Be sure that all parts are clean and
dry.
Reinstall filter element, and secure
filter cup.
Reinstall wrapper.
244 408-A / Ref. 805 211-A
1
2
3
Tools Needed:
5/16 in.