Vents, heating, and a/c – HONDA S2000 User Manual

Page 103

Advertising
background image

Push this lever up and down to
increase or decrease the fan speed
and airflow. The indicators next to
the lever show you the speed and
airflow selected.

This button turns the air
conditioning on and off. The
indicator in the button comes on
when the A/C is on.

Turning this dial clockwise increases
the temperature of the airflow.

When the recirculation indicator is
on, air from the vehicle’s interior is
sent through the system again
(recirculation mode). When the
indicator is off, air is brought in from
the outside of the vehicle (fresh air

mode).

The outside air intakes for the
heating and cooling system are at
the base of the windshield. Keep this
area clear of leaves and other debris.

The system should be left in fresh
air mode under almost all conditions.
Keeping the system in recirculation
mode, particularly with the A/C off,
can cause the windows to fog up.

Switch to recirculation mode when
driving through dusty or smoky
conditions, then return to fresh air
mode.

This button turns the rear window
defogger off and on (see page

).

Do not push the defogger button
when the convertible top is folded.

Use the mode control dial to select
the vents the air flows from. Some
air will flow from the dashboard
vents in all modes.

Air flows from the vents on

both sides of the instrument panel,
and from the dashboard vent in front
of the passenger.

Airflow is divided between

the vents in the dashboard and the
floor vents.

Air flows from the center

vents in the dashboard above the
audio system, the vents on both
sides of the instrument panel, and
from the floor vents. Select this
position when you drive with the
convertible top folded.

61

CONTINUED

Vents, Heating, and A/C

Fan Control Lever

Air Conditioning (A/C) Button

Temperature Control Dial

Airf low Controls

Recirculation Button

Rear Window Def ogger Button

Mode Control Dial

Fe
a

tu

re

s

97

Advertising