HONDA S2000 - Manual (Page 196)

A tire this worn gives very little
traction on wet roads. You should
replace the tire if you can see three
or more tread wear indicators.
The following charts show the
recommended cold tire pressures for
most normal and high-speed driving
conditions.
Your tires have wear indicators
molded into the tread. When the
tread wears down, you will see a 1/2
inch (12.7 mm) wide band across the
tread. This shows there is less than
1/16 inch (1.6 mm) of tread left on
the tire.
Excessive tread wear.
Cuts, splits, or cracks in the side
of the tire. Replace the tire if you
can see fabric or cord.
Bumps or bulges in the tread or
side of the tire. Replace the tire if
you find either of these conditions.
Every time you check inflation, you
should also examine the tires for
damage, foreign objects, and wear.
You should look for:
For convenience, the recommended
cold air pressures and tire sizes are
on a label on the driver’s doorjamb.
For additional information about
your tires, see page
.
The compact spare tire pressure is:
238
Tire Size Cold Tire Pressure
Tire Size Cold Tire Pressure
Tire Size Cold Tire Pressure
Except CR models
CR models
Except CR models
Recommended Tire Pressures
Tire Inspection
Tires
190
INDICATOR LOCATION MARKS
TREAD WEAR INDICATORS
Front:
Rear:
60 psi (420 kPa , 4.2 kgf/cm )
215/45R17 87W
245/40R17 91W
32 psi (220 kPa ,
2.2 kgf/cm )
32 psi (220 kPa ,
2.2 kgf/cm )
32 psi (220 kPa ,
2.2 kgf/cm )
255/40R17 94W