HONDA S2000 - Manual (Page 52)

The instrument panel has many
indicators to give you important
information about your vehicle.
This indicator has two functions:
It comes on when you turn the
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. A beeper
sounds if you drive with the
parking brake not fully released.
Driving with the parking brake not
fully released can damage the
brakes and tires.
If you turn the ignition switch to the
ON (II) position before fastening
your seat belts, the beeper sounds,
and the indicator flashes. If you do
not fasten your seat belts before the
beeper stops, the indicator stops
flashing but remains on.
If this indicator comes on when the
engine is running, the battery is not
being charged. For more information,
see page
.
The engine can be severely damaged
if this indicator flashes or stays on
when the engine is running. For
more information, see page
.
If either of you do not fasten your
seat belt while driving, the beeper
will sound and the indicator will flash
again at regular intervals. For more
information, see page
.
If your passenger does not fasten
their seat belt, the indicator comes
on about 6 seconds after the ignition
switch is turned to the ON (II)
position.
If it stays on after you have fully
released the parking brake while
the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more information, see
page
.
This indicator comes on when you
turn the ignition switch to the ON
(II) position. It reminds you and your
passenger to fasten your seat belts.
A beeper also sounds if you and your
passenger have not fastened your
seat belts.
2.
1.
16
218
218
220
Instrument Panel Indicators
Seat Belt Reminder
Indicator
Parking Brake and
Brake System
Indicator
Charging System
Indicator
Low Oil Pressure
Indicator
46
U.S. Canada