HONDA S2000 - Manual (Page 87)

Carefully set the removable
hardtop on the vehicle, making
sure the lock rods go into the
positioning holes behind each door.
Be careful not to pinch your
fingers. Push in the tab on each locking
lever and pull the locking lever
down.
Push the locking lever forward
and set the latch into the
windshield header.
Pull back on the locking lever and
push it up until it latches. Make
sure it is securely latched.
Pivot the lock rods backward to
lock down the sides of the hardtop.
Make sure the rear window
defogger wire is set under the lock
rod to ensure the wire is not
crushed or entangled. 10. 11.
12.
13.
14.
CONTINUED
Removable Hardtop
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
81
POSITIONING HOLE LOCKING LEVER
TAB LATCH LOCK ROD REAR WINDOW
DEFOGGER WIRE
Make sure that the lock rods do not
damage any part of the vehicle, such as
the rear wing spoiler, when you install
or remove the hardtop.