HP STORAGEWORKS XP24000 - Manual (Page 21)

Figure 8 The Add/Change Security Group Dialog Box
Description Item
Indicates the selected LDKC number. LDKC
Descriptive information about the security groups in the LDKC.
• Security indicates whether the security settings in the security group are Enabled or Disabled.
CAUTION:
It is possible that security settings are disabled even if Enabled is displayed. If the Status
is Access and the security group contains neither a host nor an LDEV group, security
settings in the security group are disabled unconditionally.
• Group Status indicates whether the security group is an Access or a Pool group. If Access
appears, the security group is an access group; volumes in the group can be accessed only
by hosts registered in the same group. If Pool appears, the security group is a pool group;
volumes in the group cannot be accessed by any hosts.
• T-VOL/R-VOL indicates whether volumes in the security group can be used as secondary
volumes (i.e., copy destination volume). Enable indicates the volumes can be used as second-
ary volumes. Disable indicates the volumes cannot be used as secondary volumes.
NOTE:
Secondary volumes (that is, copy destination volumes) are often referred to as
remote volumes or R-VOLs in the
Hitachi TrueCopy™ for Mainframe User's Guide.
Also, secondary volumes are referred to as target volumes or T-VOLs in the Hitachi
ShadowImage™ for Mainframe User's Guide.
Security
Group List
XP24000/XP20000 Volume Security User's Guide 21