HP STORAGEWORKS XP24000 - Manual (Page 44)

• Locating Ports through Which Hosts Can Access Volumes (see
“
Locating Ports through Which Hosts Can Access Volumes ” on page 45)
• Locating Security Groups that Contain a Specified Volume (see
“
Locating Security Groups that Contain a Specified Volume ” on page 45)
• Locating Hosts in a Security Group that Contains a Specified Volume (see
“
Locating Hosts in a Security Group that Contains a Specified Volume ” on page 46)
• Locating Security Groups that Contain a Specified Host Group (see “ Locating Security Groups
that Contain a Specified Host Group ” on page 46)
• Locating Security Groups that Contain a Specified LDEV Group (see
“
Locating Security Groups that Contain a Specified LDEV Group ” on page 47)
Locating Volumes in a Specified Security Group
To search a security group for volumes, select the security group in the tree view of the Volume Security
window (
Figure 4 ) and then see the list of volumes in the lower-right table.
Locating Security Groups that Contain a Specified Host
To specify a host and find the security groups in which the host is registered, you can follow either
of the two procedures below. Follow the first procedure if the desired host is displayed in the upper-right
table of the Volume Security window (
Figure 4 ). Follow the second procedure if the desired host is
not displayed in the upper-right table.
If the desired host is displayed in the upper-right table:
1. Right-click the host in the table.
2. From the pop-up menu, select List -> Host to Security Group.
The Host to Security Group dialog box appears (
Figure 15 ). The dialog box displays the security
groups that you want.
If the desired host is not displayed in the upper-right table:
1. In the tree view of the Volume Security window ( Figure 15 ), right-click an item except for a host
group or LDEV group that appears immediately below a security group.
2. From the pop-up menu, select List -> Host to Security Group.
The Host to Security Group dialog box appears
(“
The Host to Security Group Dialog Box ” on page 33).
3. From the Host drop-down list, select the desired host.
The table lists the security groups that you want.
Locating Volumes in a Security Group that Contains a Specified Host
If a security group is classified as an access group, the security group contains both host and volumes.
The procedures below enable you to specify a host and to find volumes in the security group in which
the specified host is registered.
Follow the first procedure if the desired host is displayed in the upper-right table of the Volume Security
window (
Figure 4 ). Follow the second procedure if the desired host is not displayed in the upper-right
table.
If the desired host is displayed in the upper-right table:
1. Right-click the host in the table.
2. From the pop-up menu, select List -> Host to LDEV.
Performing Volume Security Operations 44