HP STORAGEWORKS XP24000 - Manual (Page 46)

2. From the pop-up menu, select List -> LDEV to Security Group.
The LDEV to Security Group dialog box appears (
Figure 19 ). The table on the right displays the
security groups that you want.
If the desired volume is not displayed in the lower-right table:
1. In the tree view of the Volume Security window ( Figure 4 ), right-click an item except for a host
group or LDEV group that appears immediately below a security group.
2. From the pop-up menu, select List -> LDEV to Security Group.
The LDEV to Security Group dialog box appears (
Figure 19 ).
3. Select a CU image number from the CU drop-down list, and then select an LDEV number from
the lower-left table.
The table on the right lists the security groups that you want.
Locating Hosts in a Security Group that Contains a Specified Volume
If a security group is classified as an access group, the security group contains both host and volumes.
The procedures below enable you to specify a volume and to find hosts in the security group in which
the specified volume is registered.
Follow the first procedure if the desired volume is displayed in the lower-right table of the Volume
Security window (
Figure 4 ). Follow the second procedure if the desired volume is not displayed in
the lower-right table.
If the desired volume is displayed in the lower-right table:
1. Right-click the volume in the table.
2. From the pop-up menu, select List -> LDEV to Host.
The LDEV to Host dialog box appears (
Figure 20 ). The table on the right displays a list of hosts.
If the desired volume is not displayed in the lower-right table:
1. In the tree view of the Volume Security window ( Figure 4 ), right-click an item except for a host
group or LDEV group that appears immediately below a security group.
2. From the pop-up menu, select List -> LDEV to Host.
The LDEV to Host dialog box appears (
Figure 20 ).
3. Select a CU image number from the CU drop-down list, and then select an LDEV number from
the lower-left table.
The table on the right lists the security groups that you want.
Locating Security Groups that Contain a Specified Host Group
To specify a host group and then find security groups in which the specified host group is registered,
follow the procedure below:
1. In the tree view of the Volume Security window ( Figure 4 ), right-click an item except for a host
group or LDEV group that appears immediately below a security group.
2. From the pop-up menu, select List -> Host Group to Security Group.
The Host Group to Security Group dialog box appears (
Figure 17 ).
3. From the Host Group drop-down list, select the desired host Group.
The table lists the security groups that you want.
Performing Volume Security Operations 46