HP STORAGEWORKS XP24000 User Manual
Page 45
The Host to LDEV dialog box appears (
). The dialog box displays a list of volumes.
3.
Right-click an arrow at the right end of the CU drop-down list, and then see how many CU image
numbers appear.
• If only one CU image number appears, the table in the dialog box displays all the volumes
that you want.
• If two or more CU image numbers appear, the table in the dialog box currently displays some
of the volumes that you want. Select each CU image number to find volumes in the specified
CU image.
If the desired host is not displayed in the upper-right table:
1.
In the tree view of the Volume Security window (
), right-click an item except for a host
group or LDEV group that appears immediately below a security group.
2.
From the pop-up menu, select List -> Host to LDEV.
The Host to LDEV dialog box appears (
).
3.
From the Host drop-down list, select the desired host.
4.
Right-click an arrow at the right end of the CU drop-down list, and then see how many CU image
numbers appear.
• If only one CU image number appears, the table in the dialog box displays all the volumes
that you want.
• If two or more CU image numbers appear, the table in the dialog box currently displays some
of the volumes that you want. Select each CU image number to find volumes in the specified
CU image.
Locating Ports through Which Hosts Can Access Volumes
To find ports via which a host can access volumes, you must ensure that Volume Security Port Option
is already installed.
To find ports via which a host can access volumes, follow the procedure below.
To find ports via which a host can access volumes:
1.
In the Volume Security window (
), right-click an item in the tree view and then select List
-> Host Group to Port from the pop-up menu.
The Host Group to Port dialog box appears (
).
2.
Select a host group from the Host Group drop-down list.
3.
Select a host from the Host drop-down list.
The Port list displays ports via which the specified host can access volumes.
4.
Click OK to close the Host Group to Port dialog box.
You are returned to the Volume Security window.
Locating Security Groups that Contain a Specified Volume
To specify a volume and find the security groups in which the volume is registered, you can follow
either of the two procedures below. Follow the first procedure if the desired volume is displayed in
the lower-right table of the Volume Security window (
). Follow the second procedure if the
desired volume is not displayed in the lower-right table.
If the desired volume is displayed in the lower-right table:
1.
Right-click the volume in the table.
XP24000/XP20000 Volume Security User's Guide
45