HP STORAGEWORKS XP24000 - Manual (Page 55)

CAUTION:
When registering volumes in an LDEV group, you are strongly recommended to click the Apply button
in the Volume Security window, as described in the last step of the following procedure. If you forget
to click Apply, the volumes might be unregistered when you encounter an error registering the LDEV
group (see “
Registering an LDEV Group in a Security Group ” on page 56).
To register volumes in an LDEV group:
1. Ensure that you are in Modify mode.
2. In the Volume Security window ( Figure 4 ), double-click an LDKC number.
3. Right-click an LDEV group.
A pop-up menu appears.
4. Select Specify and then LDEV from the pop-up menu.
The Select LDEV dialog box (
Figure 12 ) appears.
5. Use the CU drop-down list to specify a CU image.
The two boxes below the drop-down list displays volumes in the specified CU image.
• The Registered in LDEV group box displays volumes registered in the LDEV group.
• The Not registered in LDEV group box displays volumes that are not registered in the LDEV
group.
6. In the Not registered in LDEV group box, select volumes that you want to register. Then, click the
Regist button.
The selected volumes move to the Registered in LDEV group box.
7. To register volumes in other CU images, return to step 5.
8. Click OK.
CAUTION:
Here, the settings in the window have not been applied to the storage system.
9. Click Apply in the Volume Security window ( Figure 4 ).
A message appears and asks if you want to apply the settings to the storage system.
10. Click Yes.
The settings are applied to the storage system.
Creating a Security Group for Use As a Pool Group
To make security settings, you must create security groups. Security groups can be classified as access
groups or pool groups. You must classify a security group as a pool group if you want to prohibit all
the hosts from accessing volumes.
To create a security group and classify the group as a pool group:
1. Ensure that you are in Modify mode.
2. In the Volume Security window ( Figure 4 ), double-click an LDKC number.
3. Right-click Security Group.
A pop-up menu appears.
XP24000/XP20000 Volume Security User's Guide 55