HP STORAGEWORKS XP24000 - Manual (Page 57)

5. Use the Select Security Group drop-down list to select a security group in which you want to register
an LDEV group.
6. Use the LDEV Group drop-down list to select an LDEV group that you want to register in the security
group, and then click OK.
7. Click Apply in the Volume Security window ( Figure 4 ).
A message appears and asks if you want to apply the settings to the storage system.
8. Click Yes.
The settings are applied to the storage system.
CAUTION:
If the Error Detail dialog box (section “ The Error Detail Dialog Box ” on page 41) appears, see
the Caution in section “ Port-Level Security Implementation ” on page 10 and then remove errors.
Protecting Volumes from Copy Operations
The following procedure makes volumes in a security group unusable as secondary volumes (that is,
copy destination volumes) for copy operations, so you will be able to protect data the volumes from
being overwritten by copy operations.
To make volumes in a security group unusable as secondary volumes:
1. Ensure that you are in Modify mode.
2. In the Volume Security window ( Figure 4 ), double-click an LDKC number.
3. Right-click Security Group or the desired security group.
A pop-up menu appears.
4. Select Add/Change from the pop-up menu.
The Add/Change Security Group dialog box (
Figure 8 ) appears.
5. Ensure that the desired security group is selected in the Security Group List table.
6. Select Disable in the T-VOL/R-VOL box.
7. Click Change.
The change is reflected in the dialog box.
8. Click OK.
CAUTION:
Here, the settings in the window have not been applied to the storage system.
9. Click Apply in the Volume Security window ( Figure 4 ).
A message appears and asks if you want to apply the settings to the storage system.
10. Click Yes.
The settings are applied to the storage system.
XP24000/XP20000 Volume Security User's Guide 57