Hitachi CP-X600 - Manual (Page 18)

8
Adjusting the zoom and focus
.
Use the zoom ring to adjust the screen size.
.
Use the focus ring to focus the picture.
Operating
Focus ring
Zoom ring
Using the automatic adjustment feature
.
Press the AUTO button on the remote control.
 For an RGB signal
The vertical position, the horizontal position, the horizontal
phase and the horizontal size will be automatically adjusted.
And the aspect ratio will be automatically set to default. Make sure that the
application window is set to its maximum size prior to attempting to use this
feature. A dark picture may still be incorrectly adjusted. Use a bright picture
when adjusting.
 For a video signal or s-video signal
The video format best suited for the respective input signal will be selected
automatically.
This function is available only when the AUTO is selected to the VIDEO
FORMAT item in INPUT menu (31) . For a component video signal, the
signal type is identified automatically independently of this function.
 For a video signal, s-video signal or component video signal
The vertical position, horizontal position and aspect ratio will be automatically
set to default.
 For a component video signal
The horizontal phase will be automatically set to default.
● The automatic adjustment operation requires about 10 seconds. Also please
note that it may not function correctly with some input.
Top
HOME PAGE UP
PAGE DOWN END
VIDEO RGB SEARCH
FREEZE
OFF
ON
MAGNIFY
ASPECT AUTO BLANK
MUTE
VOLUME
KEYSTONE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET