Hitachi CP-X600 - Manual (Page 63)

63
Warranty And After-Service / Specification
Warranty and after-service
If a problem occurs with the equipment, first refer to the “Troubleshooting” and run
through the suggested checks. If this does not resolve the problem, please contact your
dealer or service company. They will tell you what warranty condition is applied.
Specification
Item Specification
Product name Liquid crystal projector
Liquid
Crystal
Panel
Panel size .0 cm (0.79 type)
Drive system TFT active matrix
Pixels
786,43 pixels (04 horizontal x 768 vertical)
Lens Zoom lens F=.7 ~ . f=4 ~ 9 mm
Lamp 85W UHB
Speaker 4W x 
Power supply AC 00-0V/5.0A, AC0-40V/.A
Power consumption 460W
Temperature range 5 ~ 35°C (Operating)
Size
48 (W) x 39 (H) x 39 (D) mm
(Not including protruding parts)
* Please refer to the following figure.
Weight (mass) 6.9 kg
Ports
Optional
parts
Lamp DT0077
Air filter MU0364
Others * Please consult your dealer.
RGB input port
RGB .......D-sub 5pin mini x
RGB .......D-sub 5pin mini x
RGB output port
RGB OUT..D-sub 5pin mini x
Video input port
Y, C
B
/P
B,
C
R
/P
R
.......... RCA x3
S-VIDEO ................S-video x
VIDEO .......................Video x
Audio input port
AUDIO IN .......Stereo mini x
AUDIO IN .......Stereo mini x
AUDIO IN3 ................. RCA x
AUDIO IN4 ................. RCA x
Communication port
CONTROL .......... D-sub 9pin x
NOTE • These specifications are subject to change without notice.