Hitachi CP-X600 - Manual (Page 43)

43
Item Description
MY BUTTON
This item is to assign one of the following function to MY BUTTON
 and  on the remote control (6).
Choose 1 or 2 on the MY BUTTON menu using the ◄/► button
first. Then using the ▲/▼ buttons sets one of the following functions
to the chosen button.
• RGB: Sets port to RGB.
• RGB: Sets port to RGB.
• COMPONENT: Sets port to COMPONENT (Y, C
b
/P
b
, C
r
/P
r
).
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
• INFORMATION: Displays a dialog of INPUT INFORMATION (45).
• AUTO KEYSTONE EXECUTE:
Performs automatic keystone distortion correction (34).
• MY MEMORY:
Loads one of adjustment data stored (27).
• When the current adjustment is not saved to memory a dialog is displayed.
If you want to keep the current adjustment, please press the ◄
button to quit. Otherwise the current adjusted condition will be lost
by loading a data.
• PICTURE MODE: Changes the PICTURE MODE (23).
• FILTER RESET:
Displays the filter time reset confirmation dialogue (42).
• ACTIVE IRIS: Changes the active iris mode.
• VOLUME+: Set the volume up.
• VOLUME-: Set the volume down.
SERVICE
Selecting this item displays the SERVICE menu.
Select an item using the ▲/▼ buttons, and press the ► button or
the ENTER button on the remote control to execute the item.
FAN SPEED ó AUTO ADJUST ó GHOST ó FILTER MESSAGE ó KEY LOCK
FACTORY RESET ó INFORMATION ó REMOTE FREQ. ó REMOTE RECEIV.
FAN SPEED
Using the ▲/▼ buttons switches the rotation speed
of the cooling fans. The HIGH is the mode for use at
highlands etc. Note that the projector is noisier when
the HIGH is selected.
HIGH ó NORMAL
OPTION Menu (continued)
OPTION Menu
6GORQTCT[EQPFKVKQP

/'/14;  4GECNNUCXGFRCTCOGVGTU
 3WKV
0QUCXGFFCVC
(#052''&
*+)*
014/#.
(continued on next page)