Hitachi CP-X600 - Manual (Page 21)


Operating
Temporarily blanking the screen
.
Press the BLANK button on the remote control.
The blank screen will be displayed instead of the screen
of input signal. Please refer to the BLANK item in SCREEN
menu (37).
To exit from the blank screen and return to the input signal screen, press the
BLANK button again.
● The projector automatically returns to the input signal screen when one of
the projector’s buttons or the remote control buttons is pressed or one of the
commands (except get commands) is transmitted to the control port.
NOTE • The sound is not connected with the blank screen function. If
necessary, set the volume or mute first.
HOME PAGE UP
PAGE DOWN END
VIDEO RGB SEARCH
FREEZE
OFF
ON
MAGNIFY
ASPECT AUTO BLANK
MUTE
VOLUME
KEYSTONE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET