HP 3000dtn User Manual
Page 107
ENWW
8-7
z
Check the power
If the printer is turned on:
Make sure your printer is selected as the current or default printer.
For information about setting the default printer, see the online Help
for your computer’s operating system.
If the printer is not turned on:
Press
(power button) on the printer. After a brief printer startup,
you should see a steady green light (the Ready light) on the LCD
control panel.
Note
If you tried to print when the printer was turned off, an alert message
should have appeared on your computer. If the printer was off and
you did not see a message when you tried to print, the printer setup
might be incorrect. Uninstall the printer software by running the
uninstaller program in the printer’s program group or the
Add/Remove Programs utility (Windows) or by selecting the
uninstall option in the Installer (Mac OS). Then reinstall the software
that came with your printer.
The printer Attention light blinks
This indicates an event that requires user intervention or an error has
occurred. For example, a printer cover might not be closed properly, or
the carriage might be jammed.
z
Check the LCD control panel
If the message shows a printer error, see “
.” Follow the recommended actions to resolve the error.
z
Restart the printer
If the LCD control panel displays the message
XX.XXXX
SERVICE
ERROR
, the printer might have a hardware problem. Press and hold
(power button) to turn off the printer. Wait a few seconds, and
then turn it on again. In most situations, this action solves the
problem. If the message persists, your printer might need service.
Write down the error code, and then go to hp instant support to
learn more about possible causes for the message. See "
" for more information.