HP 3000dtn User Manual
Page 173
ENWW
B-3
CHOSEN PERSONALITY
NOT AVAILABLE
Error
The printer is not able to process the print job
because the requested personality (printer
language) is not available. The job was
canceled and no pages were printed. Resend
the print job using a supported personality
(PCL 5c, PCL 6, or PS 3 emulation).
CLEANING
PRINTHEADS
Status
The printer is cleaning the printheads.
Please wait.
CLEARING EVENT LOG
Status
The printer is clearing its event log. The event
log is a record of past printer events.
No action is required.
CLEARING PAPER PATH
Status
The printer is attempting to clear residual
paper from the paper path. Please wait until it
is complete.
CLOSE COVERS
Error
The covers are open or not closed completely.
Close all covers to continue printing.
If you need to replace a printhead, the printer
must be in printhead replacement mode. See
“
” for more information.
COLOR CALIBRATION
FAILED
Warning
The color calibration has failed. Make sure
plain letter or A4 paper is loaded in the printer,
and then start the color calibration from the
LCD control panel. For more information,
see “
.”
DATA RECEIVED
Warning
The printer has received some print job data,
but not enough to start printing. It will time out
and cancel the job after the timeout period if
all the required data is not received. The I/O
timeout period can be set in the LCD control
panel. For more information about setting the
I/O timeout, see “
.”
DELETING...
[JOBNAME]
Status
The printer is deleting a print job. No action
is required.
DEPRESSURIZING
WAIT FOR XX MINUTES
Status
The printer is purging the air in the ink
delivery tubes. Please wait until the process
is complete.
Message
Type
Description