HP 3000dtn - Manual (Page 27)

ENWW
2-13
Connecting the printer with a USB cable in the Mac OS
Note When setting up the printer using a USB cable, install the software
first, and then connect the printer to the computer.
1 Insert the Starter CD into the CD-ROM drive. The CD menu runs
automatically.
If the CD menu does not run automatically, double-click the CD icon
on the desktop, and then double-click the ClassicInstaller icon (if
you are using Mac OS 8.6 to Mac OS 9.2.2) or the CarbonInstaller
icon (if you are using Mac OS X). This icon is located in the
Installer:<language> folder of the Starter CD (where <language> is
your language preference).
2 Follow the instructions on the screen.
3 Connect the cable between the ports on the computer and
the printer.
4 If you are using Mac OS 8.6 to Mac OS 9.2.2, complete steps 5
through 9.
-Or-
If you are using Mac OS X or later, complete steps 10 through 13.
Mac OS 8.6 to Mac OS 9.2.2
5 Open the Desktop Printer Utility:
• Mac OS 8.6 to Mac OS 9.0.x: On the hard drive, double-click
the Desktop Printer Utility icon in the Apple Extras:
Apple LaserWriter Software folder.
• Mac OS 9.1.x to Mac OS 9.2.2: On the hard drive, double-click
the Desktop Printer Utility icon in the Applications (Mac OS 9):
Utilities folder.
6 On the pop-up menu, select LaserWriter8, select Printer (USB)
from the list, and then click OK.
7 In the PostScript Printer Description (PPD) File section of the
window that appears, click Auto Setup.
8 Make sure HP Business Inkjet 3000 is selected and click Select.
9 Click Create. The printer icon appears on the desktop.