HP 3000dtn - Manual (Page 31)

ENWW
2-17
Mac OS X
10 Open the Print Center (located in the Applications\Utilities folder),
and then click Add Printer.
11 If you are using an AppleTalk network, on the pop-up menu,
select AppleTalk.
-Or-
If you are using an LPR network, on the pop-up menu, select LPR
Printer using IP, and then type the IP address for the printer.
12 If necessary, select the Zone.
13 Select HP Business Inkjet 3000 from the list, and then click Add.
A blue dot appears beside the printer name, indicating that this
printer is now the default printer.
Step 7: Enable optional accessories in the
printer driver
If you have installed an auto-duplex unit, Tray 3, or the multipurpose
tray (which in installed in the Tray 1 location), you must enable these
optional accessories in the printer driver.
If you are using operating systems other than Windows or Macintosh,
you might need to enable optional accessories from the LCD control
panel Printing menu. For more information, see “
Printing menu .”
To enable optional accessories in Windows
1 Click Start, point to Settings, and then click Printers
(Windows 98, Windows Millennium Edition, Windows NT 4.0, and
Windows 2000).
-Or-
Click Start, and then click Printers and Faxes (Windows XP).
2 Right-click the icon for the desired printer driver, and then click
Properties.
• PCL 6: On the Configure tab, select the check boxes for your
optional accessories, and then click OK.
• PCL 5c/PS: On the Device Options tab, click the optional
accessories you want to enable, choose Installed from the
drop-down menu, and then click OK.
Note For information on selecting and loading media for printing,
see “
Selecting and loading print media .”