HP KAYAK XM600 - Manual (Page 49)

2 Installing and Replacing Hardware Parts in Your PC Workstation
System Board Switches
49
System Board Switches
There are ten system board switches used for configuration, numbered
from 1 to 10. Of these a certain number are reserved and should not be
modified, otherwise it could lead to a system failure.
Switch Default Position To Configure:
1-5 OFF Reserved 1-5. Do Not change Default Settings
6 ON Enables keyboard power-on.
OFF disables this option.
7 OFF Enables normal modes.
ON enables the BIOS recovery mode at next boot.
8 OFF Retains CMOS memory.
ON clears CMOS memory at next boot.
9 OFF Enables User and System Administrator passwords.
ON clears the passwords at next boot.
10 ON Selects the chassis type.
ON = minitower
Location of system
board switches