HTC Wildfire S EN - Manual (Page 141)

Installing HTC Sync that came with the storage
card
Copy the HTC Sync installer from the storage card to your computer and use it to
install.
§ The HTC Sync version in the storage card that came with HTC Wildfire S can be
installed on a computer running Windows 7, Windows Vista, or Windows XP.
§ HTC Sync requires USB 2.0 on your computer to connect and sync with
HTC Wildfire S.
§ For trouble-free installation, first quit all running programs and temporarily exit
from your anti-virus program before you start installing HTC Sync.
1. Connect HTC Wildfire S to your computer using the supplied USB cable.
2. On the Connect to PC screen, tap Disk drive, and then tap Done. On your
computer, HTC Wildfire S is recognized as a removable disk.
3. Navigate to the removable disk and open it.
4. Copy HTCSync.exe to your computer.
5. After copying, unmount the removable disk (that is, HTC Wildfire S) as required
by your computer’s operating system to safely remove HTC Wildfire S.
6. On your computer, double-click HTCSync.exe and follow the onscreen
instructions to install HTC Sync.
After installing HTC Sync, the HTC Sync icon is added to your computer’s system
tray (check the bottom-right side of your computer screen). You can double-click this
icon to open HTC Sync.
Setting up HTC Sync to recognize
HTC Wildfire S
1. Connect HTC Wildfire S to your computer using the USB cable that came in the
box.
2. When HTC Wildfire S prompts you to choose a type of USB connection, tap
HTC Sync, and then tap Done. Wait for HTC Sync to recognize HTC Wildfire S.
3. On the Device setup screen, enter a name for HTC Wildfire S.
4. Click Save. The Device panel then opens.
To change the name of HTC Wildfire S later, click Overview > Device setup.
141 HTC Sync