HTC Wildfire S EN - Manual (Page 85)

Changing camera settings
Open the menu panel to access and change camera settings.
To open the camera settings, press .
Self-portrait (photo
mode only) Select this option to take your own closeup shot.
Self-timer (photo mode
only) Set a time delay before your camera automatically takes
the photo.
Image adjustments Slide your finger across each of the slider bars to adjust the
exposure, contrast, saturation, and sharpness.
White balance White balance enables the camera to capture colors more
accurately by adjusting to your current lighting
environment.
Resolution/Video
quality Choose a photo or video resolution to use.
ISO (photo mode only) Choose an ISO level or set it back to Auto. Higher ISO
numbers are better for taking pictures in low light
conditions.
Review duration Set the time for a captured photo or video to be displayed
on the Review screen before the camera changes back to
the Viewfinder screen.
Widescreen (photo
mode only) When this check box is selected (default), photo
resolutions available for selection are in 3:2 ratio and you
can use the entire Viewfinder screen to frame your subject.
When not selected, photo resolutions available for selection
are in standard 4:3 ratio.
Geo-tag photos (photo
mode only) Select to store GPS location in your captured photos.
Auto enhance (photo
mode only) Select to reduce noise when using a high ISO setting and to
automatically adjust photo brightness.
Auto focus (photo
mode only) Enables or disables centered auto focus.
Face detection (photo
mode only) Select to automatically recognize faces and adjust the
focus when you take people photos. Face detection will be
turned off if you disable auto focus.
Shutter sound Select to play a sound when you press the shutter release
or record button.
Grid (photo mode only) Select to display a grid on the Viewfinder screen so you
can easily frame and center your subject before taking the
photo.
85 Camera