HTC Wildfire S EN - Manual (Page 166)

Unpairing from a Bluetooth device
You can make HTC Wildfire S forget its pairing connection with another Bluetooth
device. Doing so may require you to enter or confirm a passcode again if you want to
reconnect to the other device.
1. From the Home screen, press , and then tap Settings > Wireless & networks.
2. Tap Bluetooth settings.
3. In the Bluetooth devices section, press and hold the device to unpair.
4. Tap Disconnect & unpair, or tap Unpair if the Bluetooth device is currently not
connected to HTC Wildfire S.
Sending information using Bluetooth
You can use Bluetooth to send information from HTC Wildfire S to another Bluetooth
enabled device such as a phone or notebook computer. You can send the following
types of information, depending on the device you are sending to:
§ Images and videos
§ Calendar events
§ Contacts
§ Audio files
Before you begin, set the receiving device to discoverable mode. You may also
need to set it to “Receive Beams” or “Receive Files”. Refer to the device’s
documentation for instructions on receiving information over Bluetooth.
1. On HTC Wildfire S, open the app that contains the information or file you want
to send.
2. Follow the steps for the type of item you want to send:
Captured photo or
video After capturing, on the Camera preview screen, tap ,
and then tap Bluetooth.
Photos or videos
1. On the Albums tab of the Gallery app, choose an
album.
2. Tap , and then tap Bluetooth.
3. Choose the photos and videos you want to share, and
then tap Next.
166 Bluetooth