Hotpoint BS61 MK2 - Manual (Page 31)

3. CONTROL PANEL / TRIMS / INNER DOOR PANEL & GLASS
(a) Control Panel
Regularly wipe with a clean, damp cloth and
polish with a clean, dry cloth.
(b) Trims
It is advisable to clean the trims regularly to pre
vent any build up of soiling which may detract
from the appearance of the cooker. The recom
mended method of cleaning is to wipe over the
trims with a clean, soft cloth wrung out in hot
water, or mild non abrasive cleaner. (If in doubt
try the cleaner on a small area of trim which is
not noticeable in normal use), then after wiping
with a cloth wrung out in clear water, dry with a
clean, soft cloth.
(c) Inner Door Panels & Glass
Open the door fully. The glass panel may now
be washed. Stubborn stains can be removed by
using a well soaped, fine steel wool soap pad.
4. REPLACEMENT OF THE OVEN LAMP
Open the oven door and remove the oven
shelves. Using a thick cloth, grip the lamp lens,
unscrew anti-clockwis and remove the lens.
Carefully unscrew the bulb anti-clockwise. Fit
replacement bulb (15W 300°C SES). Fit
replacement bulb and refit lens.
5. HOW TO CLEAN THE LAMP LENS
Open the oven door and remove the oven
shelves. Using a thick cloth, grip the lamp lens,
unscrew anti-clockwise and remove. Clean with
a non-abrasive cleansing cream and refit lamp
lens.
CARE AND CLEANING
DO NOT use scouring pads, or abrasive powder, which
will scratch the glass.
Warning: Before removing lamp lens, please ensure that
the electricity supply to the appliance is switched off and
the appliance is fully cold.
Warning: Before cleaning lamp lens, please ensure that
the electricity supply to the appliance is switched off and
the appliance is fully cold.
DO NOT use scouring pads, or abrasive powder, which
will scratch the glass lens
TRIMS
OVEN
DOOR
MAIN OVEN LAMP
31
MAIN OVEN LAMP