HONDA SB 2040 - Manual (Page 19)

SB2040 Snowblower
Check Belt Routing Path
1. Move the PTO clutch lever to ON. Verify the belt has been routed as shown.
RIGHT SIDE
ENGINE CRANKSHAFT PULLEY
TWIST IN BELT ON
RIGHT SIDE PULLE
Check Belt Guards and Gap
Inspect the four belt guards on the PTO
clutch assembly. Verify each guard is
positiioned as shown.
Check the spacing between the the two
pulleys and the four belt guards. Verify
there is a gap
of 1/8 - 3/16" (3 -5 mm).
FIXED (LEFT SIDE) PULLEY \\--
REAR VIEW
20
-
23 ft-lb.
(27
-
31
MOVEABLE (RIGHT SIDE) PULLEY
18
POP 52152 (9610)