HONDA SB 2040 - Manual (Page 38)

SB2040 Snowblower Maintenance & Adjustments
Install the New Belt
1. Installation is the reverse of removal. Refer to the illustration here to make sure the new belt is
properly oriented along all pulleys. RIGHT SIDE
ENGINE CRANKSHAFT PULLEY
TWIST IN BELT ON
RIGHT SIDE PULLE
2. Make sure the belt guards are
correctly positioned as shown.
Tighten the center bolt on each
pulley to 27 - 31 N'm
(20 - 23 ft.-lb.).
There should be a 3 -5 mm
(1/8 - 3/16") gap [A] between each
guard and pulley.
Belt Tension Adjustment
1. Adjust the belt tension as described
i
on page 19.
FIXED (LEFT SIDE) PULLEY
REARVIEW
20
-
23 ft-lb.
(27 31
MOVEABLE (RIGHT SIDE) PULLEY
PTO OFF
POP 521 52 (961 0)
37