HONDA SB 2040 - Manual (Page 27)

Safety Recommendations SB2040 Snowblower
Controls
Discharge Chute Rotation Crank
Rotating this crank turns the discharge chute.
Discharge Chute Deflector
This determines the angle at which snow is
discharged from the chute. The two locking knobs on
the sides hold the chute at the desired angle.
TURNS CHUTE RIGHT TURNS CHUTE LEFT
ROTATE
DEFLECTOR
Lockout Pin
The blowerhead pivots up and down on the subframe. Use the
lockout pin to lock the blowerhead so it doesn’t pivot. This is
necessary when servicing, removing or installing the
snowblower.
Get a helper to raise and lower the blowerhead so the lockout
pin can be engaged or released. Always secure the lockout
pin with the spring clip to prevent it from getting lost.
26
POP 52152 (9610)