Connecting to a windows nt server 4.0 – HP 3C905-TX User Manual
Page 28
Connecting to a Windows NT Server 4.0
Windows for Workgroups ver. 3.11
Connecting to a Windows NT Server 4.0
Windows for Workgroups
ver. 3.11
Requirements
•
HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.
•
3COM Etherlink 3C905 Ethernet card and drivers disk ver. 4.3.
•
DOS ODI Name (Vectra VL7 alone): EL90X.DOS Size: 46KB
Date: 12/20/96
•
NDIS Driver Name: El90X.386 Size: 72KB Date: 1/29/98
•
Microsoft Windows NT Server 4.0 machine that supports Net BEUI,
NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
•
Network Driver Optimization Normal
•
Full Duplex Auto Select (N-WAY)
•
Boot PROM Disabled
•
Media Type Auto Select (N-WAY)
Procedure
1 With the HP Vectra turned off, install the 3COM Etherlink III 3C905
adapter card into a PCI slot.
Vectra VL8
Vectra VL7
I/O Base Address
FCC0h (PCI)
FCC0h (PCI)
Interrupt Request
Level
9 (PCI)
9 (PCI)
c905.bk : ch_9.fb4 Page 1 Thursday, October 22, 1998 9:51 AM