Connecting to a netware 3.12 server – HP 3C905-TX User Manual
Page 3
Connecting to a Netware 3.12 server
Windows for Workgroups
Connecting to a Netware 3.12 server
Windows for
Workgroups
Requirements
•
HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.
•
3COM Etherlink 3C905 Ethernet card and drivers disk ver 2.1.
•
Vectra VL8 Driver Name: 3C90X.LAN Size: 33KB Date: 2/5/98
•
Vectra VL7 Driver Name: EL90XIDS.INF Size: 2K Date: 2/23/96
•
DOS and MS-Windows for Workgroups 3.11 media.
•
Novell Netware server that supports Net BEUI, NWLink IPX/SPX, and
•
NWLink NetBIOS transfer protocols.
•
32-bit Netware client for DOS and MS-Windows.
Device Configuration
•
Network Driver Optimization Normal
•
Full DuplexAuto Select (N-Way)
•
Boot PROM Disabled
•
Media Type Auto Select (N-Way)
Procedure
1 With the HP Vectra turned off, install the 3COM Fast Etherlink 3C905
Vectra VL8
Vectra VL7
I/O Base Address
FCC0h (PCI)
FC40h (PCI)
Interrupt Request
9 (PCI)
9 (PCI)
c905.bk : ch_1.fb4 Page 1 Thursday, October 22, 1998 9:51 AM