Hitachi 51S700 - Manual (Page 20)

20
CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING A COMPONENT SOURCE WITH DIGITAL INTERFACE CAPABILITY TO IEEE1394 TERMINALS
1.
Connect the IEEE1394 cable from the output of the component with IEEE1394 capability, such as a Set-Top-Box or Digital VCR,
to the IEEE1394 input terminals shown on the TV set below. IEEE 1394 allows the television and the external device to
communicate with one another. When using IEEE1394 connections, you enable video and audio digital data exchange between
a compatible device. This connection also enables you to control basic equipment functions (such as VCR play, rewind, fast
forward, stop, etc.) from your TV On-Screen Display.
2. Press the AV NET button on the Remote Control.
3. Select chosen IEEE1394 device (see page 26).
S-VIDEO R (MONO)/L VIDEO
1
DIGITAL INTERFACE
S-VIDEO R (MONO)/L VIDEO
2
LINE OUT
IEEE1394 Cable
IEEE1394
Digital VCR (D-VHS)
CENTER
IN
P B
DVI-HDTV
ANT A
TO
CONVERTER
ANT B
L
AUDIO
TO HI-FI
R
S-VIDEO
S-VIDEO
S-VIDEO
Y/VIDEO
R (MONO)/L
R (MONO)/L VIDEO
R (MONO)/L VIDEO
R L VIDEO
INPUT 1
INPUT 2
INPUT 3
INPUT 4
MONITOR
OUT
AUDIO
AUDIO
ANT C
(DTV)
Multi Media
Card
IEEE1394
OPTICAL OUT
Digital Audio
P B P R Y
R (MONO)/L
NOTES: 1. To quickly enter IEEE1394 menu, press the AV NET button on the remote control and then select the IEEE1394
device.
2. This TV’s IEEE1394 connection is not compatible with a DV camcorder (Digital Video camcorder) and a PC.
3. With IEEE1394 connection, video and audio will be received by the TV. It will enable you to control the D-VHS from
the TV IEEE1394 menu (see page 26).
4. The IEEE1394 interface contains the copy protection standard called 5C or Digital Transmission Content Protection
(DTCP).
5. This TV does not support full network control of several IEEE1394 devices simultaneously (the IEEE1394 will dis-
connect from 1st device when making connection to 2nd device).
6. See page 12 for tips on Rear Panel Connections.
FIRST TIME USE