Hitachi 51S700 - Manual (Page 51)

CHANNEL MANAGER
51
Select ANTENNA if you are using an indoor or outdoor antenna. Select Cable if you have cable TV. Chan. Manager
Move SEL Return
Channel Source
Antenna
Cable(1) Cable(2)
Auto Channel Scan Start
THUMB
STICK
SELECT
THUMB
STICK
Move SEL Select
Channel Source
Antenna
Cable(1) Cable(2)
Auto Channel Scan Start
Ant B (NTSC)
Chan. Manager
Move SEL Select
Ant A (NTSC)
Channel List
Chan. Manager
Ant A (NTSC)
Channel List
Chan. Manager
Ant A (NTSC)
THUMB
STICK
Ant C (DTV)
NOTE:
If certain CATV channels are poor or not possible in
Cable(1) mode, select Cable(2).
Use THUMB STICK
̇
,
̈
to highlight the correct signal source.
Press down on THUMB STICK to select highlighted signal source.
Press EXIT to quit MENU or select ANT A, ANT B or ANT C to return to previous menu.
Choose ANT C for digital signals. Select Antenna if you are using an indoor or outdoor antenna to receive your digital signals or select
cable if you have digital cable.
THUMB
STICK
SELECT
Move SEL Return
Source
Auto Channel Scan Clear
Antenna Cable
Signal Meter
Ant B (NTSC)
Move SEL Select
Chan. Manager
Ant A (NTSC)
Ant C (DTV)
Chan. Manager
Ant C (DTV)
Start
Channel List
ON-SCREEN DISPLA
Y