Hitachi 51S700 - Manual (Page 53)

53
CHANNEL MANAGER
This feature will automatically store active TV channels in Auto Channel Scan. This will allow you to skip
unused channels when using CHANNEL UP (
̆ ) or DOWN ( ̄ ).
If the EXIT button is pressed while AUTO CHANNEL SCAN function is engaged, programming will stop. If two antenna are
connected, switch antenna inputs with the ANT button and repeat AUTO CHANNEL SCAN for the second antenna input.
Remember to select the correct ANTENNA/CABLE mode before using AUTO CHANNEL SCAN.
See CHANNEL LIST - SCAN to add or to delete additional channels (see page 55).
Auto Channel Scan
THUMB
STICK
SELECT
THUMB
STICK
SEL Cancel
Move SEL Select
Source
Antenna
Cable(1) Cable(2)
Auto Channel Scan Start
Move SEL Select
Source
Antenna
Cable(1) Cable(2)
Auto Channel Scan Start
Cancel
Scanning Channel Number: 66
Chan. Manager Chan. Manager
Chan. Manager
Auto Channel Scan
Ant A (NTSC) Ant A (NTSC)
Channel List Channel List
Ant A (NTSC)
ANT A/ANT B
SEL Cancel
Cancel
Scanning Channel Number: 66
Move SEL Select
Source
Auto Channel Scan
Antenna Cable
Signal Meter
000-000
THUMB
STICK
SELECT
Chan. Manager
Chan. Manager
Auto Channel Scan
Clear Start
Channel List
Ant C (DTV)
Ant C (DTV)
ANT C
Press down on THUMB STICK to cancel Auto Channel Scan.
Use THUMBSTICK to highlight Clear, then press down on THUMBSTICK to clear the Channel List.
Repeat Auto Channel Scan - Start.
Press EXIT to quit menu.
ON-SCREEN DISPLA
Y