Hitachi 51S700 - Manual (Page 26)

HOW TO USE THE REMOTE TO
CONTROL YOUR TV
26
NOTES: 1. The digital device will be automatically recognized if properly connected.
2. Four (4) IEEE1394 devices can be listed on the menu, but only 1 device at a time can be used. If a fifth device is
connected, it will replace the first device on the menu list.
3. This TV’s IEEE1394 connection is not compatible with a DV camcorder (Digital Video Camcorder) or a PC.
4. The On-Screen-Display will not disappear until the EXIT button is pressed.
5. Not all devices with IEEE1394 capability are compatible with this TV. Any compatibility problems with other
manufacturers devices should be brought to the attention of those manufacturers.
6. TV IN/OUT functions are not available when DVHS is in playback or recording.
IEEE1394 Use this function to control your devices with digital interface capability. Press the AV NET button to confirm if your 1394
device is connected.
(When an IEEE1394 device is not connected)
(When an IEEE1394 device is connected)
Use THUMB STICK ̆ , ̄ to highlight connected device (example D-VHS1).
Use THUMB STICK ̈ to select connected device (example D-VHS1).
Use THUMB STICK cursors to highlight POWER.
Press down on THUMB STICK to power on the device.
Use THUMB STICK cursors to select D-VHS operation.
Press down on the THUMB STICK to enable the selected operation.
Use THUMB STICK cursors to highlight the TV IN/OUT operation.
Press down on THUMB STICK to select: TV IN is DVHS
TV OUT is ANT C
Photo MC
Move (No 1394 Devices)
ACCESS
AV NET
Photo MC ACCESS
AV NET
Move To Enter 1394 Menu
DVHS1 POWER
Move Select
00:00:00 - -
- - DVHS2
ANT
SEL
In/Out: TV TV
Move
DVHS1 POWER
Move Select
00:00:00 - -
Off DVHS2
ANT
SEL
In/Out: TV TV
[MITSUBISHI HS-HD2000U ]
Counter : 00:00:11
THUMB
STICK
DVHS1
Move Select
DVHS2
ANT
SEL
(x2)
THUMB
STICK
THUMB
STICK
Press down on THUMB STICK to select
ANT C/A/B.
THE REMOTE CONTROL