Hotpoint BD62 BD52 - Manual (Page 14)

14
Multifunction Selector Switch
The Multifunction selector switch is
used when operating the main oven.
With the exception of the O
position the main oven light will
remain on when this selector switch
is used.
Off
With the selector in this position the
main oven will not heat up. The
timer will still operate.
Fan Oven
The oven fan and a rear element are
controlled when this function is
selected.
Use the main oven thermostat
control to set the required
temperature.
Conventional Oven
Top and base elements are
controlled when this function is
selected.
Use the main oven thermostat to
set the required temperature.
Half Grill
With this function selected only the
left hand side of the grill will be on.
Use the oven thermostat control to
set the required temperature.
Oven door must be open for grilling.
Full Grill
Both left and right hand grill
elements will be on in this position.
Use the oven thermostat control to
set the required temperature.
Oven door must be open for grilling.
Fan Grill
The oven fan and fan grill element
are controlled when this function is
selected.
Use the oven thermostat control to
set the required temperature.
Oven door must be closed for fan
grilling.
Fan Only
The oven fan will operate when this
function is selected.
The oven thermostat control must
be set in the off position.
Light Only
This function switches on the oven
light only.