Husqvarna 14 Pro - Manual (Page 3)

English –
1
Operator’s Manual for
Rider 14 Pro
CONTENTS
IMPORTANT INFORMATION
Read through these instructions carefully so that you know how to use and maintain the
machine before using it.
For servicing other than described in this manual contact an authorised dealer for parts and
service.
Explanation of symbols ...................................... 2
Safety instructions .............................................. 3
General use ..................................................... 3
Driving on slopes ............................................. 4
Children ............................................................ 5
Maintenance .................................................... 5
Presentation ........................................................ 7
Location of the controls .................................... 7
Throttle control ................................................. 8
Choke lever ...................................................... 8
Speed limiter .................................................... 8
Cutting unit ....................................................... 9
Lift lever for cutting unit .................................... 9
Lever for adjustment of cutting height ............ 10
Parking brake ................................................. 10
Seat ................................................................ 10
Fuelling .......................................................... 10
Driving ................................................................ 11
Before starting ................................................ 11
Starting the engine ......................................... 11
Driving the machine ....................................... 12
Cutting tips ..................................................... 13
Stopping the engine ....................................... 14
Disengage lever ............................................. 14
Maintenance ...................................................... 15
Maintenance schedule ................................... 15
Removing of the machine hoods ................... 16
Checking the engine’s oil level ....................... 17
Checking the engine’s cooling air intake ........ 17
Checking the fuel pump’s air filter .................. 19
Checking the transmission’s air intake ........... 18
Checking the transmission’s oil level ............. 18
Checking and adjusting the steering wires .... 19
Adjusting the brakes ...................................... 20
Check the level of the battery acid ................. 20
Check the safety system ................................ 20
Replacing the air filter .................................... 21
Fitting the cutting unit ..................................... 22
Installing BioClip 90 ....................................... 23
Checking and adjustment of the cutting
unit´s ground pressure ................................... 23
Checking the cutting unit´s parallelism .......... 24
Adjusting the parallelism of the cutting unit .... 24
Removing the cutting unit .............................. 25
Removing the belts ........................................ 26
Replacing the cutting unit’s belts .................... 27
Service position for the cutting unit ................ 30
Checking the blades ...................................... 32
Changing the oil ............................................. 33
Replacement of the oil filter ........................... 34
Lubrication ..................................................... 34
General lubrication ......................................... 34
Lubricating front wheel bearings .................... 34
Checking and adjustment of throttle wire ....... 35
Checking the tyre pressure ............................ 35
Replacement of fuel filter ............................... 36
Muffler air intake, cleaning the filter ............... 36
Trouble shooting schedule .............................. 37
Storage ............................................................... 38
Winter storage ................................................ 38
Service ........................................................... 38
Wiring diagram .................................................. 39
Technical data ................................................... 40
Travel and transport on public roads
Check the relevant road traffic regulations before driving the machine on a public road. If transporting the
machine on another vehicle always use approved securing devices and make sure that the machine is
securely held.
Towing
If your machine has a hydrostatic transmission you should only tow it very short distances at low speed if
absolutely necessary, otherwise the transmission may be damaged.
Intended use
This machine is designed solely for cutting grass on conventional lawns and other cleared and leveled
ground without obstacles, as rocks, stumps etc., and, in conjunction with accessories supplied by the
manufacturer even for other special tasks for which instructions are delivered with the accessory. Use in any
other way is considered as contrary to the intended use. Compliance with and strict adherence to the
conditions of operation, service and repair as specified by the manufacturer also constitute essential
elements of the intended use.
This machine should be operated, serviced and repaired only by persons who are familiar with its particular
characteristics and who are acquainted with the relevant safety procedures.
Accident prevention regulations, all other generally recognised regulations on safety and occupational
medicine, and all road traffic regulations must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve the manufacturer of liability for any
resulting damage or injury