HONDA DT18 - Manual (Page 21)

English – 19
PRESENTATION
Cutting unit
Depth lever
Use the depth lever to raise and lower the blades
between working and transport position. When the
lever is up, the blades are in working position.
Depth knob
The knob is used to adjust the cutting depth of the
blades. Turning the knob counterclockwise
increases the working depth.
Depth lock
The screw under the depth knob is used to lock the
depth knob to prevent it being changed by machine
vibrations. Undo the depth lock by turning it
counterclockwise before turning the depth knob.
Secure the depth knob with the depth lock after
adjusting settings.
Clutch
The clutch tightens the drive belt and engages the
drive for the blades. When the clutch lever is
pressed against the handle, the blades begin to
rotate. Hold the clutch tightly when working so that
the belt does not slide.
8011-107
8011-108
8011-109
8011-162