HONDA DT18 - Manual (Page 9)

English – 7
SAFETY INSTRUCTIONS
• Husqvarna original spare parts are designed
and specified to maintain high quality and
correct fit for optimal durability and lifespan.
From a safety point of view, you should only
use Husqvarna original spare parts.
• Check that all safety decals are in place. See
the chapter ”Symbols and decals”.
• Learn how to use the machine and its controls
safely and learn to recognize the safety decals.
• Only use the machine for sowing and
dethatching lawns. It is not intended for any
other use.
• Check that the machine is in serviceable
condition prior to use; see the chapter
”Maintenance/Maintenance schedule”.
• Only use the machine in daylight or in other
well-lit conditions. Keep the machine a safe
distance from holes or other irregularities in the
ground. Pay attention to other possible risks.
• Only allow the machine to be used by adults
who are familiar with its use.
• Never allow children or persons not trained in
the use of the machine to use or service it.
Local laws may regulate the age of the user.
• People and animals can distract you causing
you to lose control of the machine. For this
reason, you should always concentrate and
focus on the task at hand.
• Never leave the machine unsupervised with
the engine running.
• Make sure that other people are nearby when
you are using the machine so that you can call
for help should an emergency arise.
• The machine is tested and approved only with
the equipment originally provided or
recommended by the manufacturer.
WARNING!
Overexposure to vibration may
lead to circulatory or nerve
damage, particularly in people who
have impaired circulation.
Contact your doctor if you
experience symptoms that could
have been caused by
overexposure to vibration.
Examples of common symptoms
include numbness, pain, muscle
weakness, change of skin color or
an uncomfortable feeling of
tingling. These symptoms appear
most frequently in the fingers,
hands or wrists.
WARNING!
The engine can become very hot.
To avoid being burned, you must
turn off the engine and wait until
all parts have cooled before
touching the engine.