HONDA DT18 - Manual (Page 46)

44 – English
3.
Adapt the handle for assembly of the control lever
mounting by drilling two holes in the handle (see
illustration).
4.
Fit the seed control lever on the handle with the
accompanying 1/4" hex screws (Z), washers (Y)
and hex nuts (W). Affix the cable to the handle in
three places using the cable brackets (X) (see
illustration). Affix the open/close decal (Å) on the
handle beside the lever (see illustration).
W. Hex nuts
X. Cable bracket
Y. Washer
Z. Hex screws
Å. Decal, open/close
8011-014
8011-015
ASSEMBLY INSTRUCTIONS