Hypertec ISDN 10T Router - Manual (Page 34)

Configura
27
NMS System Menus
In addition to the NMS menus, which are indicated by the tabs along the top of the displays, there are
five System Menus which are listed along the very top of the window. These menus are File,
Diagnostic, Product Info., View and Help.
The File menu consists of:
Save Config
Load Config
Download Config to Device
Reset Config
Load Code
Recent Files
Exit.
The “Save Config” is used to save the router configuration to a file, which may be restored at a later
time. The “Load Config” is used to restore the saved configuration file to the NMS and optionally to
the router. If you choose not to restore the configuration directly to the router, you can do it with
“Download Configuration to Device”. The “Reset Config” is used to reset the router configuration to
its manufacturer default values. Finally in this category, the “Load Code” is used to perform the TFTP
firmware update. Please use “Reset Config” and “Load Code” with care. The NMS will pop you a
warning dialog box for confirmation.
The Diagnostic menu consists of:
Ping
Reset Device
Disconnect Internet
Disconnect Intranet
The “Ping” utility is use to send ICMP messages to a destination station for connectivity check. The
“Reset Device” is used to reset the ISDN router. The “Disconnect Internet” is used to manually
terminate the Internet connection. And the “Disconnect Intranet” is used to manually terminate the
Intranet connection.
The Product Info. menu displays a window showing the version and release of the NMS product.
The View menu includes items for turning the Toolbar and Statusbar on and off.
The Help menu includes:
Index for accessing specific help topics
Using Help for information about the help system
About NMS for version and release information about NMS.